Samsung DW80J7550UG/AA User Manual - Page 29

English - 29 - lowes

Get Samsung DW80J7550UG/AA PDF manuals and user guides View all Samsung DW80J7550UG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

06 troubleshooting PROBLEM There are food particles remaining on dishes. (Not cleaning properly.) POSSIBLE CAUSE The cycle selected was unsuitable. The water temperature is low. Low water pressure. The water is too hard. Dishwasher detergent was not used. Detergent remains in the dispenser. There is no rinse aid. A nozzle is clogged. SOLUTION Select a cycle according to the number and soil level of the dishes, as directed in this manual. Connect the water supply line to a hot water supply. For best performance, the temperature of the supplied water should be 120 ˚F (49 ˚C). The water pressure should be between 20 and 120 psi (140 ~ 830 kPa). Use a commercial dishwasher cleaner. Use high-quality, fresh detergent with rinse aid. Clean the filter at least once per month. (See page 26.) Use a water softener additive designed for dishwashers. Use automatic dishwasher detergent. We recommend a powder or gel type dishwasher detergent. Make sure large items such as cookie sheets, cutting boards, or contaners, etc. are not blocking the detergent dispenser and preventing it from opening properly. Rearrange the dishes so they do not interfere with detergent dispenser operation. Check the dispenser and add rinse aid. Use liquid type rinse aid. Clean the nozzle. See pages 24 and 26. Leaves glasses with a light film. Leaves a yellow or brown film on the inside of the dishwasher. The dishes are improperly loaded. Too many dishes have been loaded. Rearrange the dishes so they do not interfere with nozzle rotation and detergent dispenser operation. Load only an appropriate number of dishes. Load your dishes as recommended. (See page 17.) Filter could be clogged. Scrape food from dishes prior to loading. (Do not (Food soils remain on the filter.) prerinse.) Clean the soils and filters. (See page 26.) The water supplied is soft and Underload the dishwasher and use a rinse aid to too much detergent was used. minimize this. Aluminum dishes were included in the wash load. Remove the marks on the dishes using a low sensitivity cleaner. This is caused by coffee and Remove the soils using a spot cleaner. tea soils. DW80H994_DD68-00164A-03_EN_150408.indd Sec7:29 English - 29 2015-04-08 7:44:26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
English - 29
PROBLEM
POSSIBLE CAUSE
SOLUTION
There are food
particles remaining
on dishes.
(Not cleaning
properly.)
The cycle selected was
unsuitable.
Select a cycle according to the number and soil
level of the dishes, as directed in this manual.
The water temperature is low.
Connect the water supply line to a hot water
supply. For best performance, the temperature of
the supplied water should be 120 ˚F (49 ˚C).
Low water pressure.
The water pressure should be between 20 and
120 psi (140 ~ 830 kPa).
The water is too hard.
Use a commercial dishwasher cleaner.
Use high-quality, fresh detergent with rinse aid.
Clean the filter at least once per month. (See
page
26
.)
Use a water softener additive designed for
dishwashers.
Dishwasher detergent was not
used.
Use automatic dishwasher detergent.
We recommend a powder or gel type
dishwasher detergent.
Detergent remains in the
dispenser.
Make sure large items such as cookie sheets,
cutting boards, or contaners, etc. are not
blocking the detergent dispenser and preventing
it from opening properly.
Rearrange the dishes so they do not interfere
with detergent dispenser operation.
There is no rinse aid.
Check the dispenser and add rinse aid.
Use liquid type rinse aid.
A nozzle is clogged.
Clean the nozzle. See pages
24
and
26
.
The dishes are improperly
loaded.
Too many dishes have been
loaded.
Rearrange the dishes so they do not interfere
with nozzle rotation and detergent dispenser
operation.
Load only an appropriate number of dishes.
Load your dishes as recommended.
(See page
17
.)
Filter could be clogged.
(Food soils remain on the filter.)
Scrape food from dishes prior to loading. (Do not
prerinse.)
Clean the soils and filters. (See page
26
.)
Leaves glasses
with a light film.
The water supplied is soft and
too much detergent was used.
Underload the dishwasher and use a rinse aid to
minimize this.
Aluminum dishes were
included in the wash load.
Remove the marks on the dishes using a low
sensitivity cleaner.
Leaves a yellow
or brown film on
the inside of the
dishwasher.
This is caused by coffee and
tea soils.
Remove the soils using a spot cleaner.
06
troubleshooting
DW80H994_DD68-00164A-03_EN_150408.indd Sec7:29
DW80H994_DD68-00164A-03_EN_150408.indd
Sec7:29
2015-04-08 7:44:26
2015-04-08
7:44:26