Samsung DW80R5060 User Manual - Page 6
installing the dishwasher
View all Samsung DW80R5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
installing the dishwasher Be sure that you or your installer follow these instructions closely so that the new dishwasher works properly and that you're not at risk of injury when washing dishes. STEP 1 CHECK THE PARTS AND TOOLS Before starting on the installation, prepare all the necessary tools and parts required to install the dishwasher. This will save installation time and simplify the installation process. Parts required Provided with the dishwasher. Check when you unbox the dishwasher in Step 5. 2 Installation Brackets 2 Flat Head Screws (For the installation bracket) 2 Screws (for the kick plate) Protective sticker Not provided Nut connector & seal (for ¾" 90° fitting) Kick Plate Twist on wire connector Strain relief Electrical tape & Standard duct tape Hot water supply line 90° Fitting ( ¾" ) Tube fittings Teflon® tape or sealing compound Hose clamp Air gap Rubber connector For the hot water supply line - We strongly recommend using 3/8" minimum O.D. copper tubing with a compression fitting or a flexible stainless steel braided hot water supply line. [Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside the tube fitting.] You also need a 90° elbow with 3/8" N.P.T. external pipe threads on one end and a fitting sized to fit your hot water supply line (copper tubing/compression fitting or braided hose) on the other. For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes may require the cable to have a BX style metal jacket. 6_ installing the dishwasher Installation_DD81-02034B-020_EN.indd Sec3:6 2/51/0/82/0210617 1100::5566::0000AAMM