Samsung DW80R7060 User Manual - Page 13

STEP 3, Check water supply requirements and cautions

Get Samsung DW80R7060 PDF manuals and user guides View all Samsung DW80R7060 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

STEP 3 Check water supply requirements and cautions • The hot water supply line pressure must be between 20~120 psi (140~830 kPa). • Adjust the water heater to deliver water between 120 °F (49 °C)~149 °F (65 °C). - The dishwasher must be connected to a hot water supply between 120 °F (49 °C)~149 °F (65 °C). This temperature range provides the best washing result and shortest cycle time. Temperature should not exceed 149 °F (65 °C) to prevent damage to dishes. - Ensure that the water supply valve is turned off before connecting the hot water supply line to the dishwasher. - Seal the hot water supply line connections using teflon tape or sealing compound to stop any water leakage. - The drain hose connected to the dishwasher must be run through the hole in the side wall so it can be connected to the drain outlet of the sink. When you install the dishwasher, ensure there is nothing on the drain hose and be careful not to damage it during the installation process. Figure 2 Power cable Hot Water Supply Line 4¼-6¼ in. (110-160 mm) Inlet valve Dishwasher bottom Installation DW8000R_DD68-00210A-00_EN.indd 13 English 13 4/25/2019 11:10:37 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
English
13
Installation
STEP 3
Check water supply requirements and cautions
•
The hot water supply line pressure must be between 20
~
120 psi (140
~
830 kPa).
•
Adjust the water heater to deliver water between 120 °F (49 °C)
~
149 °F (65 °C).
-
The dishwasher must be connected to a hot water supply between 120 °F
(49 °C)
~
149 °F (65 °C). This temperature range provides the best washing result
and shortest cycle time. Temperature should not exceed 149 °F (65 °C) to prevent
damage to dishes.
-
Ensure that the water supply valve is turned off before connecting the hot water
supply line to the dishwasher.
-
Seal the hot water supply line connections using teflon tape or sealing compound to
stop any water leakage.
-
The drain hose connected to the dishwasher must be run through the hole in the
side wall so it can be connected to the drain outlet of the sink. When you install the
dishwasher, ensure there is nothing on the drain hose and be careful not to damage
it during the installation process.
Figure 2
Dishwasher bottom
Hot Water
Supply Line
4¼-6¼ in.
(110-160 mm)
Power cable
Inlet valve
DW8000R_DD68-00210A-00_EN.indd
13
4/25/2019
11:10:37 AM