Samsung DW80R7060UG/AA User Manual - Page 22

STEP 8, Leveling the dishwasher

Get Samsung DW80R7060UG/AA PDF manuals and user guides View all Samsung DW80R7060UG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Installation Installation STEP 8 Leveling the dishwasher 1. Open the door and place the level against the top of the tub on the inside and check if the the dishwasher is level. If it is not level, rotate the leveling legs at the bottom front of the dishwasher until the dishwasher is level. See the first note below for instructions on adusting the height of the front legs. 2. Use the level to check if the dishwasher is level front to back, as shown in the figure to the right. If the dishwasher is not level front to back, adjust the height of the rear leg until the dishwasher is level. See the second note below for instructions on adusting the the rear leg. NOTE To prevent leaks from the door, make sure that the front of the dishwasher is not lower than the back. 3. Open the door of the dishwasher and check if both the tub and door clearances are correct. If not, rotate the leveling legs on the bottom front of the dishwasher. You can aslo check this by placing a level against an inside front vertical surface of the tub. 22 English DW8000R_DD68-00210A-00_EN.indd 22 4/25/2019 11:10:53 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Installation
Installation
English
22
STEP 8
Leveling the dishwasher
1.
Open the door and place the level
against the top of the tub on the inside
and check if the the dishwasher is level.
If it is not level, rotate the leveling legs
at the bottom front of the dishwasher
until the dishwasher is level.
See the first note below for instructions
on adusting the height of the front legs.
2.
Use the level to check if the dishwasher
is level front to back, as shown in the
figure to the right.
If the dishwasher is not level front to
back, adjust the height of the rear leg
until the dishwasher is level.
See the second note below for
instructions on adusting the the rear
leg.
NOTE
To prevent leaks from the door, make sure
that the front of the dishwasher is not
lower than the back.
3.
Open the door of the dishwasher
and check if both the tub and door
clearances are correct.
If not, rotate the leveling legs on the
bottom front of the dishwasher.
You can aslo check this by placing a
level against an inside front vertical
surface of the tub.
DW8000R_DD68-00210A-00_EN.indd
22
4/25/2019
11:10:53 AM