Samsung DW80R7060UG/AA User Manual - Page 27

STEP 10, Securing

Get Samsung DW80R7060UG/AA PDF manuals and user guides View all Samsung DW80R7060UG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

STEP 10 Securing 1. Check the parts on the sink to which the drain hose will be connected. 2. There are several ways to insert the drain hose into the drain hose connector of the sink, as shown in the following figures. You must connect the drain hose in accordance with the water pipe installation regulations in your region. Figure 8 Case 1. Without disposal Air gap Drain hose Without disposal Hose clamp With an air gap/without disposal Hose clamp Without an air gap Case 2. With disposal Air gap Drain hose With disposal Hose clamp Disposal with an air gap Hose clamp Without an air gap 3. Check the size of the sink's drain hose connector. If needed, cut the drain hose so its end fits onto the sink connector (5/8 in. or 1 in. - as shown in Figure 9 below). If the end of the drain hose does not fit onto the drain hose connector of the sink, use an adaptor purchasable at a plumbing/hardware supply store. Installation DW8000R_DD68-00210A-00_EN.indd 27 English 27 4/25/2019 11:11:05 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
English
27
Installation
STEP 10
Securing
1.
Check the parts on the sink to which the drain hose will be connected.
2.
There are several ways to insert the drain hose into the drain hose connector of the
sink, as shown in the following figures. You must connect the drain hose in accordance
with the water pipe installation regulations in your region.
Figure 8
Case 1.
Without disposal
Air gap
Hose clamp
Drain
hose
Hose clamp
Without disposal
With an air gap/without disposal
Without an air gap
Case 2.
With disposal
Air gap
Hose clamp
Drain
hose
Hose clamp
With disposal
Disposal with an air gap
Without an air gap
3.
Check the size of the sink’s drain hose connector. If needed, cut the drain hose so its
end fits onto the sink connector (
5
/
8
in. or 1 in. - as shown in
Figure 9
below). If the end
of the drain hose does not fit onto the drain hose connector of the sink, use an adaptor
purchasable at a plumbing/hardware supply store.
DW8000R_DD68-00210A-00_EN.indd
27
4/25/2019
11:11:05 AM