Samsung FE-N300WX User Manual (user Manual) (ver.1.0) (English) - Page 63

REMOVING AND RE-INSTALLING THE OVEN DOOR, How to remove the door, How to re-install the door

Get Samsung FE-N300WX PDF manuals and user guides View all Samsung FE-N300WX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

05 MAINTAINING YOUR APPLIANCE Removing and re-installing the oven door How to remove the door CAUTION • The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. • Turn the power OFF before removing the door. 1. Open the door completely. 2. Pull the hinge locks down toward the door frame to the unlocked position. Hinge lock Locked position Unlocked position 3. Firmly grasp both sides of the door at the top. 4. Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1). 5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2). about 5 ° Fig. 1 Fig. 2 How to re-install the door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot. Hinge arm Bottom edge of slot Indentation 3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot. Maintaining your appliance _63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Maintaining your appliance _
63
05 MAINTAINING YOUR APPLIANCE
REMOVING AND RE-INSTALLING THE OVEN DOOR
How to remove the door
CAUTION
The door is very heavy. Be careful when removing and lifting the door. Do not lift the
•
door by the handle.
Turn the power OFF before removing the door.
•
1. Open the door completely.
2.
Pull the hinge locks down toward the door frame to the unlocked position.
3.
Firmly grasp both sides of the door at the top.
4.
Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1).
5.
Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
about 5 °
Fig. 1
Fig. 2
How to re-install the door
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
3.
Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
Hinge lock
Locked position
Unlocked position
Bottom
edge of slot
Indentation
Hinge arm