Samsung FE-N500WX User Manual (user Manual) (ver.1.0) (English) - Page 64
Removing And Re-installing The Warming Drawer
UPC - 036725569478
View all Samsung FE-N500WX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Push the hinge locks up against the front frame of the oven cavity to the locked position. Hinge lock Unlocked position Locked position 5. Close the oven door. Removing and re-installing the warming drawer Turn the power OFF before removing the warming drawer. CAUTION How to remove the warming drawer Lever Lever Push down on the left guide Pull up on the right guide 1. Open the drawer to the fully opened position. 2. Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up on the right glide lever. 3. Pull the warming drawer away from the range. How to re-install the warming drawer 1. Pull the bearing glides to the front of the chassis glide. 2. Align the glide on each side of the drawer with the glide slots on the range. 3. Push the drawer into the range until levers click (approximately 2 inches). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers click or Bearing glides the bearing glides do not feel seated, remove the drawer and repeat Step 1. This will minimize possible damage to the bearing glides. 64_ Maintaining your appliance