Samsung HG48NC690DF Installation Guide Ver.1.0 (English) - Page 25

Category Hotel TV Function Item Sub Amp Mode Bathroom Speaker Sub Amp Volume Eco Solution Energy Saving Logo/Message Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Cloning Logo Display Time Clone TV to USB Clone USB to TV Setting Auto Intialize REACH 3.0 REACH 2.0 REACH Channel Group ID IPG Room Type TICKER REACH Server REACH Update Time Network REACH Update Immediate Room Number REACH 2.0 TV Sound REACH 2.0 Server Version Network Setup SmartHub Model Setting SmartHub Setting initial value 2 6 Off OFF OFF ... ... OFF OFF OFF ... All Default OFF 1hour OFF ... ON ... Description Determines the Bathroom Speaker sound AMP operation mode. • 0: Turns the Bathroom Speaker sound AMP function off (PWM off). • 1 : The Bathroom Speaker sound volume follows the TV speaker sound volume identically. The Bathroom Speaker sound volume is controlled by the TV remote or panel keys. • 2: The Bathroom Speaker sound volume is controlled by the Batroom Speaker volume controller. The initial Bathroom Speaker sound volume after TV is turned on. Adjusts the brightness of the TV to reduce power consumption. • Off: Turns off the energy saving function. • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode. Displays a the Welcome Message for 5 seconds when the TV turns On. Edits the Welcome Message. Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo Display Time". Downloads the Hospitality logo. Hospitality logo file requirements: • BMP or AVI files only. • Max file size : BMP - 960 X 540. AVI - 30MB. • The file can only be named samsung.bmp or samsung.avi. Hospitality Logo Display Time (3/5/7 seconds). Clone the current TV options to a USB memory device. Clone the saved TV options on a USB memory device to the TV. If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items are restored again to their values cloned initially. See page 34. • ON : The feature of REACH 3.0 in this TV becomes available. • OFF : The feature of REACH 3.0 in this TV becomes not available. • ON : The feature of REACH 2.0 in this TV becomes available. • OFF : The feature of REACH 2.0 in this TV becomes not available. Assign a DTV channel number to carry the update REACH data. This channel number must be the same as the number set on the Reach server. Select the group ID of the REACH server. (Refer to the REACH server manual for more details) Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the more information.) • On : The TICKER content is displayed. • Off : The TICKER content is not displayed. Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is downloaded from the REACH server to the TV : • 1hour : Every hour • 2hour : Every 2 hours • 12:00 am : every 12:00 a.m. • 12:00 pm : every 12:00 p.m. • 2:00 pm : every 2:00 p.m. • On : Whenever the TV enters standby mode (the power cord is plugged in and the power is off), the REACH data is updated on the TV. • Off : The REACH data is only updated on the TV at the REACH server update time. set the room number • ON : Soud set in the REACH 2.0 menu is outputted. • OFF : Soud set in the REACH 2.0 menu is mute. The version of REACH 2.0 is displayed. if this item is entered into, network setup menu is displayed. The network setup menu is used for setting network like access internet. Set SmartHub Model. Set up SmartHub. 25 English