Samsung HL-S5679W User Manual (ENGLISH) - Page 133
Setting up Your PC Software Based on Windows XP, then click on Properties. The Display Properties - refresh rate
UPC - 036725256613
View all Samsung HL-S5679W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Right click the mouse on the Windows Desktop, then click on Properties. The Display Properties dialog-box will be displayed. 2 Click on Settings, then set the Display Mode with reference to the Display Modes Table. (See next page) You do not need to change the Colors settings. 3 Click on Advanced. A new settings dialog box will be displayed. 4 Click on the Monitor tab, then set the Screen Refresh Rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so, instead of setting the Screen Refresh Rate. 2 5 Click "OK", then the dialog-box will disappear. Click "OK" on the "Display Properties" 3 dialog-box. 6 Shutdown the PC, and connect it to your TV. * The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. * When you use your TV as a PC monitor, it supports Colors up to 32 bits. 4 * In this case, the display on the TV may look different depending on your particular version of Windows or the PC manufacturer. * When connecting a PC, you must set it to the display settings that are supported by the TV. Otherwise, the message "Out of input range" 5 will be displayed. continued... English - 133