Samsung HT-A100T User Manual (ENGLISH) - Page 22

HDMI FUNCTION ENg resolution Selection This function allows the user to select the screen resolution for HDMI output. In Stop mode, press and hold the SD/HD (Standard Definition/High Definition) button on the remote control for longer than 5 seconds. ~ Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p. ~ SD(Standard Definition) resolution is 480p and HD (High Definition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 480P. ● CONNECTIONS M ` If the TV does not support the configured resolution, you will not be able to see the picture. ` When an HDMI cable is connected, composite and component video signals are not output. ` See your TV owner's manual for more information on how to select the TV's Video Input source. Using Anynet+(HDMI-CEC) Why use HDMI (High Definition Multimedia Interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. 1. Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19) . Set the Anynet+ function on your TV. (See the TV instructions manual for more information.) ~ You can operate the Home Theater by using the TV remote control. (Available TV buttons and , buttons, ~ button) With Anynet+ You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control. If you select the TV Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV. • receiver : On : You can listen to audio through the Home Theater. • receiver : Off : You can listen to audio through the TV. If you select the THEATEr Select THEATEr to connector and set the option of each items below. • View TV : If Anynet+(HDMI-CEC) is set to on and you select View TV, the Home Theater will automatically switch to DIGITAL IN mode. ~ THEATEr Menu : You can access and control the Home Theater menu. ~ THEATEr Operation : The Home Theater disc playback information will be displayed. You can control the Disc operation of the Home Theater such as title, chapter and subtitle change. ~ receiver : On : You can listen to audio through the Home Theater. ~ receiver : Off : You can listen to audio through the TV. MMOOVVEE EENNTTEErr EEXXIITT Move Enter Exit MOVE ENTEr EXIT M` The Theater function is available only when you listen to the audio through the Home Theater with the digital Move Enter Exit optical cable connected. 1