Samsung HT-AS610 Quick Guide (easy Manual) (ver.1.0) (English) - Page 15

Test Tone Use test tone to check the speaker connection status or level. To Automatically Output Test Tone √ REMOTE CONTROL Press TEST TONE button. • Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W. • During test tone output, press ...† button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone • Press TEST TONE button again. √ MAIN UNIT 1 Press SETUP button. • "SETUP MODE" appears on the display and enters into Setup Mode. 2 Press FUNCTION button 5 times. • "TEST-T AUTO" appears in the display. 3 Press SURROUND button. • Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W . • During test signal output, press SELECT ( , ) button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone Press SETUP button 1 time. • "SETUP MODE OFF" appears on the display and test tone stops. 28 To Manually Output Test Tone √ MAIN UNIT 1 Press SETUP button. • "SETUP MODE" appears on the display and the unit enters into Setup Mode. 2 Press FUNCTION button 6 times. • "TEST-T MANU" appears in the display. 3 Press SURROUND button. • Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W will be selected in turn. 4 Press SELECT( , ) button to set the test tone as you want. • You can adjust the speaker output level from -10 to +10dB by 1 step. • The sound gets quieter at -10dB and louder at +10dB. To Stop Test Tone Press SETUP button 1 time. • "SETUP MODE OFF" appears on the display and test signal stops. Test Tone Output • F.L (Front-Left) : -10 ~ +10dB • CEN (Center) : -10 ~ +10dB • F.R (Front-Right) : -10 ~ +10dB • S.R (Surround-Right) : -10 ~ +10dB • S.L (Surround-Left): -10 ~ +10dB • S.W (Subwoofer): -10 ~ +10dB 29 OPERATION