Samsung HT-D5210C User Manual (user Manual) (ver.1.0) (English) - Page 35
Musical Room Calibration, User EQ
View all Samsung HT-D5210C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
03 Setup Musical Room Calibration By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ASC IN 500mA 500mA ASC IN ASC microphone Musical Room Calibration Mode You will hear either the Musical Room Calibration mode or the User Speaker Settings. • Off: You will hear sound in the Speaker Setting value. • On : You will hear sound in the Musical Room Calibration mode. ✎ NOTE Running the Musical Room Calibration function takes about 3 minutes. Make sure there is no disc in the product when you run the Musical Room Calibration function. If the ASC microphone is disconnected during the Musical Room Calibration setup, the setup will be canceled. When the Musical Room Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work. If the product is connected to external devices or other components (such as an iPod, AUX, D.IN), the Musical Room Calibration Setup may not work properly. Noise may result in incorrect measurements. Ensure the room is quiet when you run the Musical Room Calibration. Place the microphone in the main listening position. Make sure there are no objects between the speakers and microphone. Note that the test tones of the speakers may be loud. Do not place the microphone behind furniture or too close to the wall. Otherwise, it can produce an incorrect test result. Measurement 1. Plug the ASC microphone into the ASC IN jack. 2. Place the ASC microphone at the listening position. • Musical Room Calibration will be automatically set up in the following sequence: Front L Center Front R Surround R Surround L Subwoofer • Press the RETURN button to cancel the Musical Room Calibration Setting. User EQ You can configure the equalizer settings manually to your preference. Settings Display Audio Network System Language Security General Support User EQ 0 0 0 0 0 0 0 6 0 6 250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz A Reset > Adjust < Move ' Return HT-D5210C_ZA_0307.indd 35 35 English 2011-03-08 12:18:29