Samsung HT-DB120 User Manual (user Manual) (ver.1.0) (English) - Page 23
Setting the Delay Time
View all Samsung HT-DB120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting the Delay Time 1 Press MENU button. 2 Press Cursor button to move to 'Audio' and then press ENTER button. 3 Press Cursor button to move to 'DELAY TIME' and then press ENTER button. Press Cursor , , 4 , buttons to move to the desired speaker and then press ENTER button. 5 Press Cursor , to set the Delay time. • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. SETUP 43 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time 50 1.3 ms 100 2.6 ms 150 3.9 ms 200 5.3 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Ds and Dc 200 400 600 Delay Time 5.3 ms 10.6 ms 15.9 ms Ideal CENTER SPEAKER placement Ideal SURROUND SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER 44