Samsung HT-DB390 User Manual (user Manual) (ver.1.0) (English) - Page 17

CONNECTIONS Resetting Wireless Communication Reset the system if a communication failure occurs, or if the synchronizing signal indicator does not light up and the "REAR CHK" message blinks on the main unit's display. Reset the system while the main unit and the wireless rear amplifier (SWA-1000) are in Power Standby mode. 1 With the main unit turned off, press and hold the remote control's WIRELESS button for 4 seconds. • Press the button until the volume control indicator lights up blue. (The indicator will turn off in 1 second.) RESET Button 2 With the wireless rear amplifier turned on, use a ball point pen or a pair of tweezers to press the RESET button on the back of the unit 2 to 3 times. Back of Wireless Rear Amplifier 3 Turn on the main unit. • The wireless rear amplifier's synchronizing signal indicator will light up. • If Power Standby mode continues, repeat Steps 1 to 3 above. Caution • Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only. • In 2-CH mode, no sound will be heard from the wireless rear speakers. Turning On the Mood Light You can turn the mood light on the wireless rear amplifier on or off, as well as change the light to one of 7 different colors according to your preference. 1 Press the POWER on the wireless amplifier. • The Power Standby indicator on the wireless amp panel will light up and the mood light will turn on. 2 Press the COLOR MODE button. • Each time the button is pressed, the color changes as follows: Blue © Light Green © Red © Sky Blue © Yellow © Pink © White. Turning Off the Mood Light • In Power Standby mode, press the ON/OFF button on the Wireless amp. The mood light will light up or turn off with the last color selected. Turning off the Wireless Amp and Mood Light • Press the POWER button on the wireless amp. The wireless rear amplifier and the mood light will turn off. When the wireless amp is powered on again, the mood light will be blue. 16