Samsung HT-X250 User Manual (user Manual) (ver.1.0) (English) - Page 9

Installing the Main Unit Method 1 : Installing the Stand so that the DVD Player Lays Flat. Preparation : ■ Disconnect the AC power cord from the AC outlet before installing the main unit. ■ Connect the cables before installation. 1 23 4 Method 2 : Installing the Stand so that the DVD Player Stands up. Preparation : ■ Disconnect the AC power cord from the AC outlet before installing the main unit. ■ Connect the cables before installation. 1 23 4 ENG CONNECTIONS 1 Turn the stand counter-clockwise and pull it apart. ■ The DVD Player and stand are separated. 2 Hold the DVD Player and stand as shown by the figure and turn the right side of the stand upward so that it is slightly slanted. 3 Insert the 2 stand anchors into the holes on the back of the DVD Player. 4 Turn the right side of the stand clockwise to fix it to the back of the DVD Player. • Be careful not to scratch the surface the DVD Player when installing the stand. • Do not turn the DVD Player left or right as it may separate it from the stand. 1 Turn the stand in the direction of the arrow and pull it apart. ■ The DVD player and stand are separated. 2 Lift the right side of the stand so that it is slightly slanted. 3 Insert the 2 stand anchors into the holes on the bottom of the DVD Player. 4 Turn the right side of the stand clockwise to fix it to the bottom of the DVD Player. Arranging the Cables Use the cable tie to keep the cables together. 16 17