Samsung HW-D550 User Manual (user Manual) (ver.1.0) (English) - Page 20

POWER TV POWER TV INFO VOL MUTE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO POWER TV POWER TV INFO VOL MUTE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO POWER TV POWER TV INFO VOL MUTE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO POWER TV POWER TV INFO VOL MUTE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO Using the Anynet+(HDMI-CEC) function Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet+ function turns on and off each time you press Anynet+. 1. Connect the product to a Samsung TV with the HDMI cable. (See page 15) 2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) ▪ The Anynet+ function supports some buttons of the remote control. (TV POWER, TV INFO, TV CH) ▪ Depending on your TV, certain HDMI output resolutions may not work. ▪ Please refer to the user's manual of your TV. Please check the logo (If your TV has an logo, then it supports Anynet+ function.) AUDIO button This button enables you to select between listening to audio from your TV or audio from the Air Track when connected via HDMI. Press AUDIO on the remote control of this unit. AUDIO MODE HDMI in ARC MODE TV AVR TV AVR Scroll Display HDMI AUDIO TV HDMI AUDIO AVR SOUND TV SOUND AVR Display SND TV HDMI S MUTE TV ARC SOFTWARE UPGRADE Samsung may offer upgrades for the Crystal Surround Air Track's system's firmware in the future. Please visit Samsung.com or contact the Samsung call center to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your Air Track. ONLY FOR UPDATE ONLY FOR UPDATE ONLY FOR UPDATE ▪ Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit. ▪ Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn off automatically after completing the firmware upgrade. When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. ▪ If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again. ▪ For upgrading purposes, do not format USB data in NTFS because it is not a supported file system. ▪ Depending on the manufacturer, the USB may not be supported. 20