Samsung HW-Q950A/ZA User Manual - Page 18

Method 2. Connecting using an Optical Cable Pre-connection Checklist • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • When you use an optical cable and the terminals have covers, be sure to remove the covers. Optical Cable (not supplied) OPTICAL OUT Top of the Soundbar Bottom of the Soundbar DIGITAL AUDIO IN (OPTICAL) HDMI 1 HDMI 2 D.IN 1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in the figure. 2. Turn on the Soundbar and TV. 3. Press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the "D.IN" mode. 4. The TV sound is output from the Soundbar. Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, "TV+Soundbar" appears under the Sound Output menu of the TV. Select the corresponding menu. TV menu HDMI Cable OR D.IN Optical Cable (not supplied) • TV menu example: TV + [AV] Soundbar series name (HDMI) NOTE • It can operate according to the Codec supported by TV. • This function is supported only when the HDMI Cable or Optical Cable (not supplied) is connected. • This function is available in some Samsung TVs and some Soundbar models. • When using Q-Symphony, you can only choose GAME PRO or ADAPTIVE SOUND. Using the Spacefit sound Provides optimized sound quality by analyzing the listening spaces. To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Settings ( ) → General → Intelligent Mode Settings → Adaptive Sound+) NOTE • The sound mode on your Soundbar will automatically change to Adaptive Sound+ if you enable the Adaptive Sound+ mode on your TV. • This function works when the Soundbar connects to some of the Samsung TVs. ENG - 18