Samsung HW-S60T User Manual - Page 39

11 SOFTWARE UPDATE Auto Update When the Soundbar is connected to the Internet, software updates automatically occur even when the Soundbar is turned off. •• To use the Auto Update function, the Soundbar must be connected to the Internet. The Wi-Fi connection to the Soundbar will be terminated if the Soundbar's power cord is disconnected or the power is cut off. If the power is cut off, when the power comes back on or you reconnect the power cord, turn on the Soundbar, and then reconnect it to the Internet. USB Update Bottom of the Soundbar SERVICE ID SET NETWORK DC 19V DIGITAL AUDIO IN HDMI (OPTICAL) (ARC) SERVICE DC 19V Micro USB to USB adapter Cable (not supplied) 1. Go to the Samsung Electronics website (www.samsung.com) → search for the model name from the customer support menu option. •• For more information about update, refer to Upgrade Guide. 2. Download the upgrade file (USB type). 3. Unzip the file to create a folder with the file name. 4. Store the created folder in a USB and then connect it to the Soundbar. 5. Turn on the Soundbar. Then the product is updated within 3 minutes. LED Indicator White moves from left to right and right to left Software update start : "Start the software update." Software update end : "The software update is complete." •• During update, do not turn it off or remove the USB. •• If update does not proceed, reconnect the Soundbar power cord. •• When the latest version is installed, no update is performed. •• Depending on the USB type, update may not be supported. Samsung may offer updates for the Soundbar's system firmware in the future. When an update is available, you can update the Soundbar by connecting the USB drive that contains the update firmware to the SERVICE port of the Soundbar. ENG - 39