Samsung J620D User Manual - Page 31
Connecting to a Wireless Internet Network with WPS, IP Setting, Enter Manually, IP Address
View all Samsung J620D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. In the IP Settings screen, set IP Setting to Enter Manually. IP Settings IP Setting IP Address Subnet Mask Gateway Enter Manually 0.0.0.0 0.0.0.0 0.0.0.0 DNS Setting DNS Server OK Enter Manually 0.0.0.0 Cancel 6. Select IP Address. When the IP Address entry window appears, enter three digits into each field on the IP Address line. If the value has less than three digits, add leading zeroes. For example, to enter 10, enter 010. After three digits have been entered in a field, the highlight automatically jumps to the next field. "" Enter numbers by pressing the number buttons. After you have filled in all four fields, press the E button again. 7. Repeat the process for Subnet Mask, Gateway, and DNS Server. 8. When done, select OK. 9. The TV attempts to connect to the network again using the entered settings. Once it has established the connection, it displays a confirmation message. Select OK. "" Network connection speeds may differ depending on the DNS server settings. "" For details on the correct DNS server settings, contact your Internet service provider (ISP). Connecting to a Wireless Internet Network with WPS MENU > Network > Network Settings If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS automatically configures the SSID and WPA key settings. ●● Your router must support WPS to use the WPS functionality. 1. On the Network Settings screen, set Network type to Wireless. The TV automatically displays a list of available wireless networks. 2. Select WPS (PBC), and then press the router's WPS or PBC button within two minutes. 3. The TV automatically acquires the SSID and password settings, and then connects to the network. Once a connection is established, the TV displays a connection message. Select OK.