Samsung LC27R500FHNXZA User Manual - Page 35

PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. Set to PC when connected to a PC. Set to AV when connected to an AV device. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor is in HDMI mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the icon. You can select PC or AV. Source Detection Select either Auto or Manual as the method to recognize input signal. Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. Power LED On Con gure the settings to enable or disable the power LED located at the lower part of the product. Working: The power LED is on when the product is turned on. Stand-by: The power LED is on when the product is turned off. Reset All Return all the settings for the product to the default factory settings. 35