Samsung LE40M87BDX Owners Instructions - Page 58

Setting Up Anynet+ The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button. 2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select On, then press the ENTER/ OK button. ➣ The Anynet+ (HDMI-CEC) function is enabled. ➣ If you select Off, Anynet+ (HDMI-CEC) is disabled. ➣ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Air 28 View TV Select Device  Record  Menu on Device  Device Operation  Receiver :Off  Setup  Move Exit Enter Setup Anynet+ (HDMI-CEC) : OffOff Auto Turn Off : OffOn Searching Connections Move Enter Return Turning an Anynet+ Device Off Automatically when the TV is Turned Off 1. Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select On, then press the ENTER/ Setup Anynet+ (HDMI-CEC) : On OK button. ➣ The Auto turn off function is enabled. ➣ If you select Off, the Auto turn off function is canceled. Auto Turn Off O: Offff Searching Connections On Press the EXIT button to exit. Move ➣ The Select Device setting of the TV remote control is to be set to Enter Return TV to use the Anynet+ function. ➣ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off. Scanning and Switching between Anynet+ Devices 1. Press the Anynet+ button. 2. Press the ▲ or ▼ button to select Select Device, then press Air 28 the ENTER/OK button. View TV DVDR1 3. Press the ▲ or ▼ button to select to a particular device and Select Device  DVDR2 press the ENTER/OK button. It is switched to the selected device. Record  Menu on Device  DVD1 DVD2 4. If you cannot find a device you want, press the ▲ or ▼ button Device Operation  to select Searching Connections, then press the ENTER/OK Receiver :Off  button. Setup  The meassage Configuring Anynet+ connection... is Move Enter displayed. When searching devices completes, the connected Return devices are listed in the Anynet+ menu. ➣ Switching to the selected devices may take up to 2 minutes. You Setup cannot cancel the operation during the switching operation. Anynet+ (HDMI-CEC) : On  ➣ The time required to scan for devices is determined by the number Auto Turn Off : On  of connected devices. Searching Connections  ➣ When the device scan is complete, the number of found devices is not displayed. ➣ Although the TV automatically scans devices when it is turned on Move Enter Return using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to search devices. ➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button. English - 56