Samsung LN32A450C1 User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 54

Scanning and Switching between Anynet+ Devices 1. Press the TOOLS button. Then press the ENTER button to select "Anynet+(HDMI-CEC)". 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching Connections", then press the ENTER button. The meassage "Configuring Anynet+ connection..." is displayed. When searching devices completes, the connected devices are listed in the Anynet+ menu. Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. The time required to scan for devices is determined by the number of connected devices. When the device scan is complete, the number of devices found are not displayed. Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the "Searching Connections" menu to search devices. If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button. TV Air 9 View TV Select Device  Record  Menu on Device  Device Operation  Receiver :Off  Setup  Move Return Enter Setup Anynet+ (HDMI-CEC) : On Auto Turn Off : Yes Searching Connections Move Enter    Return Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Description Switches from Anynet+ to TV broadcast mode. Record (Device_Name) Menu (Device_Name) Operation Connect (Device_Name) Receiver Setup Starts a recording. (This menu works only for a device supporting recording.) Shows the menu of the connected device. Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears. Shows the play control menu of the connected device. Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Your TV connects to the corresponding device. Sound is output through the receiver (home theater). You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using Anynet+. TV Remote Control Buttons Available in Anynet+ Mode Device Type Anynet+ Device Device with built-in Tuner Audio Device Operating Status After switching to the device, when the menu of the corresponding device is displayed on the screen. After switching to the device, while playing a file After switching to the device, when you are watching a TV program When Receiver is activated Available Buttons Numeric buttons ENTER Color buttons EXIT button buttons (Backward search) (Forward search) (Stop) (Play) / (Pause) CH button VOL +/- button MUTE button The Anynet+ function only works when the active source on the TV remote control is set to TV. The REC button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers' products. The , operations may differ depending on the device. English - 52