Samsung LTN406W User Manual (user Manual) (ver.1.0) (English) - Page 20
Connecting an S-VHS VCR, Connecting an External Input Source
View all Samsung LTN406W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
venus-02-en 6/28/03 8:14 AM Page 12 I N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO INPUT jacks on the TV. 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV. An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) # Each external input source device has a different back panel configuration. Connecting an External Input Source Connect the Input/AUDIO cables to the Input/AUDIO OUT jacks on the TV and the Input/AUDIO IN jacks on the VCR (Connect the cables to the jacks of the same color.) 1 Connect a set of audio cables between the AUDIO IN jacks on the VCR and the AUDIO jacks on the TV. 2 Connect a video cable between the VIDEO IN jack on the VCR and the VIDEO jack on the TV. Make sure that the output is set to TV. (See Page 33) # Each external input source device has a different back panel configuration. English-12