Samsung LTN406W User Manual (user Manual) (ver.1.0) (English) - Page 34
To Edit the Input Source Name
View all Samsung LTN406W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
venus-04-en 6/28/03 8:16 AM Page 26 O P E R AT I O N To Edit the Input Source Name Name the input device connected to the input jacks to make your input source selection easier. 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select "Input", then press the ENTER button. Press the UP/DOWN buttons to select "Edit Name", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Video1", "Video2", "S-Video", "Component1", "Component2" or "PC/DVI", then press the ENTER button. 3 Press the UP/DOWN buttons repeatedly until the correct VCR appears. After the VCR is entered, press the ENTER button. English-26
English-
26
O
PERATION
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the
MENU
button to
display the on-screen menu.
Press the
UP/DOWN
buttons to select “Input”,
then press the
ENTER
button.
Press the
UP/DOWN
buttons to select “Edit Name”,
then press the
ENTER
button.
2
Press the
UP/DOWN
buttons to select
“Video1”, “Video2”,
“S-Video”, “Component1”,
“Component2” or “PC/DVI”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons repeatedly until the
correct VCR appears.
After the VCR is entered,
press the
ENTER
button.
venus-04-en
6/28/03 8:16 AM
Page 26