Samsung ME19R7041FS/AA Installation Guide - Page 17

Step-by-step installation guide 3. Insert a self-aligning screw through the top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.) Be sure to keep the power cord tight. Be careful not to pinch the cord, especially when mounting flush to the bottom of the cabinet. CCaabbinineet tFFrornotnt CabbiinneettBBootttotmomShSehlfelf FFiilllleerr BBlloocckk EEqquuiivvaalelennt tto DtoepDtehpotfh of CCaabbiinneettRReeccesesss Selff--AAlilgignnininggScSrcerwew MiMcricorwowaavveeOOvveenn TTop 4. Attach the microwave oven to the top cabinet. 5. Insert the 2 self-aligning screws through the cabinet bottom and, if used, through the filler blocks into the outer top of the unit. (See the illustration above). Continue to support the unit until both screws are inserted and engaged at least two full turns, then fully tighten both screws until the unit is secure. E. CONNECT THE DUCTWORK FOR OUTSIDE TOP EXHAUST HHousseeDDuucct t 1. Extend the house duct down to connect to the exhaust adaptor. 2. Seal the exhaust duct joints using duct tape. 6. Install the grease filters. See the Owner's Manual packed with the microwave for instructions. NOTE: For models with installed grease filters, you do not need to install a filter 17 ME4000R_ME19R7041FS_AA_DE68-04585A-00_EN.indd 17 6/19/2019 4:23:17 PM