Samsung NA30N7755TG/AA Installation Guide - Page 25
Converting the cooktop burners, English 25
View all Samsung NA30N7755TG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Converting the cooktop burners NOTE If you are using LP gas to fuel the cooktop, the following steps and conversions must be made before the flames can be adjusted. 1. Lift off the cooktop burner caps and the cooktop burner heads from the cooktop burner manifold cups. Cap Cooktop Burner Locations Burner Head Burner Cup 2. Using a 9/32" or 7 mm nut driver, remove the burner orifice from the bottom of each burner manifold cup. NOTE Save these orifices and note their positions for future conversions back to natural gas. 3. Locate the LP conversion orifices that were shipped with the cooktop. 4. Identify the proper orifice by orifice size for each of the cooktop burners. 5. Install the proper orifices in each of the burner manifold cups and tighten with a 9/32" or 7 mm nut driver. NOTE Any other placement of orifices could result in dangerous operating conditions and/or poor cooking results. 6. Set all burner heads on top of the manifold cups in the same location as they were removed. The hole on the side of the burner heads goes over the electrodes. The burner heads are correctly installed when they are flat on the top of the manifold cups. 7. Set all burner caps on top of the burner heads. These are also flat when they are installed to ensure proper safe operation. Cooktop Burner Orifice Installation instructions Install_NA30N6555TG_DG68-01091A-02_EN+MES+CFR.indb 25 English 25 10/24/2018 4:29:28 PM