Samsung NE59M4310SS/AA Installation Guide - Page 8

Installing a 4-wire power cord WARNING WARNING The neutral wire of the supply circuit must be connected to the neutral terminal located in the lower center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block. The 4th grounding lead must be connected to the frame of the range with the ground plate and the ground screw. 1. Remove the 3 lower terminal screws from the terminal block. Remove the ground screw and ground plate and retain them. 2. Cut and discard the ground strap. Do not discard any screws. 3. Insert the one ground screw into the power cord ground wire terminal ring, through the ground plate, and into the frame of the range. 4. Insert the 3 terminal screws (removed earlier) through each power cord terminal ring and into the lower terminals of the terminal block. Be certain that the center wire (white/neutral) is connected to the center lower position of the terminal block. Tighten screws securely into the terminal block. 5. Go to step 5 on page 10 and proceed with the installation. Neutral Black White terminal Red Live 1 Ground strap Live 2 Ground plate White Black Ground screw Red Ground wire (Green) CAUTION CAUTION You must check voltage after connecting power cord. Live 1 - Neutral Live 2 - Neutral Live 1 - Live 2 120 V 120 V 208 V / 240 V Install_30_Electric_Range_USA_DG68-00108G-09_EN+MES.indb 8 English - 8 2018-07-31 3:48:04