Samsung NP-N220P User Guide - Page 107
Setting a User Password, Enter, Setup Notice, supervisor password, Set Supervisor, Password
View all Samsung NP-N220P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
3 Enter a password, press , reenter the password for confirmation, and press again. The password can be up to 8 alphanumeric characters. Special characters are not allowed. 4 When a message confirming the password configuration appears in the Setup Notice window, press . The supervisor password has been set. The supervisor password is required to turn the computer on or to enter the BIOS Setup. Setting a User Password The User Password restricts access to the computer or for configuring the BIOS Setup, like a Supervisor Password. However, the Setup items that can be configured with a User Password are restricted, unlike for a Supervisor Password. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. In the Set User Password item, press and complete the procedures from Step 3 of Setting a Supervisor Password. Setting Up a Boot Password To setup a boot password, the administrator password (Set Supervisor Password) should be set in advance. Set the Password on boot item to Enabled. Once a boot password is set, you have to enter the password to boot up the computer. 106