Samsung NV24 User Manual - Page 92

When I open the Device Manager by clicking Start

Page 92 highlights

FAQ ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. € Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. € Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer. € Turn the camera power off and on again. Transfer the file again. Case 6 When I open the Device Manager (by clicking Start ˆ (Settings) ˆ Control Panel ˆ (Performance and Maintenance) ˆSystem ˆ (Hardware) ˆ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark (?) beside them or devices with an exclamation mark (!) beside them. € Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again. For Windows 98SE PC, remove the camera driver, restart the PC, and then reinstall the camera driver. Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. € Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. Case 4 When using a USB hub. € There may be a problem in connecting the camera to the PC through a USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera directly to the PC. Case 5 Are other USB cables connected to the PC? € The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and only connect the camera USB cable to the PC. Case 8 The camera is connected to the USB port located on the front of the computer. € When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. >

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97

<<
91
>>
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
²
Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
²
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
²
Turn the camera power off and on again. Transfer the file again.
Case 4
When using a USB hub.
²
There may be a problem in connecting the camera to the PC
through a USB hub if the PC and the hub are not compatible.
Wherever possible, connect the camera directly to the PC.
Case 5
Are other USB cables connected to the PC?
²
The camera may malfunction when it is connected to the PC at
the same time as another USB cable. In this case, disconnect the
other USB cable, and only connect the camera USB cable to the
PC.
Case 6
When I open the Device Manager (by clicking Start
±
(Settings)
±
Control Panel
±
(Performance and Maintenance)
±
System
±
(Hardware)
±
Device Manager), there are Unknown Devices or
Other Devices entries with a yellow question mark (?) beside them
or devices with an exclamation mark (!) beside them.
²
Right-click on the entry with the question (?) or exclamation (!)
mark and select “Remove”. Restart the PC and connect the
camera again. For Windows 98SE PC, remove the camera driver,
restart the PC, and then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the
computer may not recognise the camera as a removable disk.
²
Stop the security programs and connect the camera to the
computer. Refer to the security program instructions about how to
temporarily disable the program.
Case 8
The camera is connected to the USB port located on the front of
the computer.
²
When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.