Samsung NV40 User Manual Ver.1.0 (English) - Page 28
Using the camera buttons to set the camera
UPC - 044701008798
View all Samsung NV40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using the camera buttons to set the camera The recording mode function can be set up by using the camera buttons. OIS (Optical Image Stabilization) button POWER button Used for turning the camera's power on / off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 74 for more information about the auto power off function. Minimize camera-shake during shooting by pressing the OIS button in Shooting Mode. SHUTTER button Used for taking an image or recording voice in the RECORDING mode. ● In MOVIE CLIP mode : Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again. ● In STILL IMAGE mode : Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data. When the Shutter button is pressed halfway down, the shutter speed and aperture will appear in the LCD and camera-shake correction will be activated. [Before using OIS] [After using OIS] OIS may not function properly in the following circumstances: - To take pictures of a moving subject - To take pictures with higher digital zoom values - When camera shake is beyond the camera-shake correction range - The slower the shutter speed, the lower the camera-shake correction performance. >