Samsung NV40 User Manual Ver.1.0 (English) - Page 40

Self-timer / Remote control This function is used when the photographer would also like to be in the picture. - Selecting a self-timer : When you press the 'shutter' button, the picture will be taken after the specified time has elapsed and the self-timer function will stay on. - Selecting a remote mode : Pressing the shutter button of a separate remote control will allow an interval of 2 seconds before the image is taken. After taking a picture, the remote mode will be maintained. But, pressing the Power button will cancel the remote mode. DOUBLE 2 SEC 10 SEC OFF ■ Description of Self-timer / Remote mode Icon Mode Description OFF You can not use the self-timer function. 10 SEC Pressing the shutter button will allow an interval of 10 seconds before the image is taken. 2 SEC Pressing the shutter button will allow an interval of 2 seconds before the image is taken. DOUBLE A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. MOTION TIMER The camera detects the subject's movement 6 seconds after pressing the Shutter button, and the picture is taken when the movement is stopped. REMOTE You can take a picture by remote control instead of using the shutter button of the camera. ■ Remote control range When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range. [Shutter button on the remote control] ■ Replacing battery for the remote control Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery. ● W hen taking a picture using the self-timer, the self-timer lamp works as follows : 10 second self-timer setting : The self-timer lamp blinks at 1 second interval for the first 7 seconds. It blinks at 0.25 second interval for the remaining 3 seconds. 2 second self-timer setting : The self-timer lamp blinks at 0.25 second interval for 2 seconds. ● If you operate the Back button during the self-timer operation, the self-timer function is canceled. ● Use a tripod to prevent camera shake. >