Samsung NX10 This Is The Upgrade Manual For Samsung Nx Lens. ( ) - Page 1

Samsung NX10 Manual

Get Samsung NX10 PDF manuals and user guides
UPC - 044701013655
View all Samsung NX10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

1. Before upgrading the firmware Make sure you use fully charged batteries. It is recommended that you use an AC adaptor for cameras that have an AC adaptor. If fully charged batteries are not used, or the power is cut during a firmware upgrade, the mainboard may be seriously damaged, resulting in camera malfunction. If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard may have to be serviced by a Samsung service centre, which may result in major repair charges. Before upgrading the firmware, make sure that you format the memory card on your PC or camera and then download the necessary firmware file. Since the MMC(MultiMediaCard) may not be suitable for firmware upgrade, depending on the model, check before you proceed with upgrading the firmware. Download the firmware file into the root directory of the memory card. Also check that the firmware file downloaded has the correct file name for the camera model. To upgrade firmware there should be sufficient free space on the memory card for the size of he firmware file. If the firmware upgrade is not completed because of insufficient memory space, delete some of the files saved on the memory to secure more free space and then try again. Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the camera only after the firmware upgrade is complete. Once the firmware is upgraded, it is not possible to restore the earlier version of the firmware. When the firmware is upgraded, all the camera settings are set to their default values. Since all the files stored in the internal memory will be deleted, ensure that files are copied to other storage devices before upgrading firmware. Before downloading firmware, make sure you read the Software Use Terms Conditions. The act of downloading the firmware is taken to mean that you have agreed to the Software Use Terms and Conditions. Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not proceed with the process on your own. Visit a Samsung service centre near you. 2. Improvements compare to F/W version 1.15 3. How to Upgrade the Firmware [Caution] If the batteries are completely discharged during the firmware upgrade, camera malfunction may occur. Make sure to use fully charged batteries for safety. Ensure that you format the SD card before using it, and then save the firmware file on the formatted SD card. 1) Download the firmware file into the root directory of the SD memory card. Please check the firmware file capicity whether it 15.5M or not. 2) After saving the firmware file to the SD card, please use the hardware safty removal as below. 3) Insert the SD card on which the firmware file is to be saved. 4) Press the menu button. 5) Move to "Setup Menu 3" (Press the left button of 4-wat key.) 6) Select the "Firmware Update" (After pressing the left button of 4-way key, press the OK button for 1 time.)

  • 1
  • 2
TITLE :
NX - 10 Firmware (Ver. 01.15)
1. Before upgrading the firmware
Make sure you use fully charged batteries. It is recommended that you use an AC adaptor for cameras
that have an AC adaptor. If fully charged batteries are not used, or the power is cut during a firmware
upgrade, the mainboard may be seriously damaged, resulting in camera malfunction.
If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard
may have to be serviced by a Samsung service centre, which may result in major repair charges.
Before upgrading the firmware, make sure that you format the memory card on your PC or camera and
then download the necessary firmware file. Since the MMC(MultiMediaCard) may not be suitable for
firmware upgrade, depending on the model, check before you proceed with upgrading the firmware.
Download the firmware file into the root directory of the memory card. Also check that the firmware file
downloaded has the correct file name for the camera model.
To upgrade firmware there should be sufficient free space on the memory card for the size of he firmware
file. If the firmware upgrade is not completed because of insufficient memory space, delete some of the
files saved on the memory to secure more free space and then try again.
Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the
camera only after the firmware upgrade is complete.
Once the firmware is upgraded, it is not possible to restore the earlier version of the firmware. When the
firmware is upgraded, all the camera settings are set to their default values. Since all the files stored in
the internal memory will be deleted, ensure that files are copied to other storage devices before upgrading
firmware.
Before downloading firmware, make sure you read the Software Use Terms Conditions. The act of
downloading the firmware is taken to mean that you have agreed to the Software Use Terms and Conditions.
Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not
proceed with the process on your own. Visit a Samsung service centre near you.
2. Improvements compare to F/W version 1.15
We added EVF selection function on the AMOLED displayed menu.
We added MF Asist On/Off selection function.
We added MF usage function while using K
- Mount Adapter.
We improved Auto White Balance function of Low color temperature condition.
We improved SD Card Read/Write speed.
System stablization.
3. How to Upgrade the Firmware
[Caution]
If the batteries are completely discharged during the firmware upgrade, camera malfunction may occur.
Make sure to use fully charged batteries for safety. Ensure that you format the SD card before using it,
and then save the firmware file on the formatted SD card.
1) Download the firmware file into the root directory of the SD memory card.
Please check the firmware file capicity whether it 15.5M or not.
2) After saving the firmware file to the SD card, please use the hardware safty removal as below.
3) Insert the SD card on which the firmware file is to be saved.
4) Press the menu button.
5) Move to "Setup Menu 3" (Press the left button of 4-wat key.)
6) Select the "Firmware Update"
(After pressing the left button of 4-way key, press the OK button for 1 time.)