Samsung NX58K9850SG/AA Installation Guide - Page 21
Step 3. Convert to lp gas (optional), RATINGS LP Gas [Propane] 10 in WCP
View all Samsung NX58K9850SG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. Connect flexible metal appliance connector to the adapter on the range. Position range to permit connection at the shut-off valve. 5. When all connections have been made, make sure all range controls are in the off position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system. WARNING To prevent death, personal injury, explosion, and/or fire hazard, DO NOT use a flame to check for gas leaks. When using test pressures greater than ½ psig to pressure-test the gas supply system of the residence, disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures of ½ psig or less to test the gas supply system, simply isolate the range from the gas supply system by closing the individual shut-off valve. WARNING Do not exceed 25 ft-lbs of torque when making gas line connections. Overtightening may crack the pressure regulator resulting in a gas leak. Flexible connector hookup Installer: Inform the consumer of the location of the gas shut-off valve. Gas Flow into Range Gas Shut-Off Valve 0.5-in or 0.75-in Gas Pipe Adapter Tubing Line to Oven Burner Control Valve Flex Connector (6-ft max.) Tubing Line to Cooktop Control Manifold Adapter Pressure Regulator NOTE If your area requires a rigid pipe hookup, contact a qualified installer, service agency, or gas supplier. NOTE The gas shut-off valve should be installed in an accessible location in the gas piping, external to the appliance, for the purpose of turning on or shutting off the gas to the appliance. Step 3. Convert to lp gas (optional) All new gas ranges are shipped from the factory set up to use natural gas. Any Samsung gas range can be converted to use LP gas. Refer to page 55 in the User Manual to contact a qualified service technician. The conversion process should only be performed by a qualified LP gas installer. Conversion instructions and LP orifices will be supplied with the LP conversion kit. The conversion to LP requires all burner orifices to be changed (5 surface burners and 2 oven burners). In addition, the nozzle on the gas pressure regulator needs to be reversed. All replaced orifices must be left with the consumer, including the instructions and retrofit sizes and orifice indication. Checking the flame quality all burner after converting to lp gas. BURNER ORIFICE SIZES AND OUTPUT RATINGS (LP Gas [Propane] 10 in WCP) Burner BTU Location Rate Orifice Size [mm] In: 0.46/ RF 16,500 Out: 0.83 (2 pcs) LF 11,500 1.04 RR 4,000 0.62 LR 7,500 0.83 CTR 7,500 0.83 BAKE 15,000 1.15 BROIL 14,500 1.12 BURNER ORIFICE SIZES AND OUTPUT RATINGS (Natural Gas 5 in WCP) Burner BTU location Rate Orifice size [mm] In: 0.85/ RF 22,000 Out: 1.36 (2 pcs) LF 15,000 1.78 RR 5,000 1.01 LR 9,500 1.40 CTR 9,500 1.38 BAKE 18,000 1.90 BROIL 13,500 1.64 Installation instructions English 21