Samsung NX58R5601SS/AA Installation Guide - Page 24

Installation instructions Step 3. Convert to lp gas (optional) All new gas ranges are shipped from the factory set up to use natural gas. Any Samsung gas range can be converted to use LP gas. Refer to page 80 in the User Manual to contact a qualified service technician. The conversion process should only be performed by a qualified LP gas installer. Conversion instructions and LP orifices will be supplied with the LP conversion kit. The conversion to LP requires all burner orifices to be changed (5 surface burners and 2 oven burners). In addition, the nozzle on the gas pressure regulator needs to be reversed. All replaced orifices must be left with the consumer, including the instructions and retrofit sizes and orifice indication. BURNER ORIFICE SIZES AND OUTPUT RATINGS (LP Gas [Propane] 10 in WCP) Burner Location BTU Rate Orifice Size [mm] RF¹ RF² RF3 LF¹ LF² LF3 RR LR CTR BAKE BROIL 14,500 12,500 14,500 11,500 10,000 10,000 4,000 7,500 7,500 15,000 11,500 1.12 1.06 1.12 1.04 0.98 0.98 0.62 0.83 0.83 1.15 1.02 ¹ Model NX58*565*** ² Model NX58*560*** 3 Model NX58*751*** BURNER ORIFICE SIZES AND OUTPUT RATINGS (Natural Gas 5 in WCP) Burner Location BTU Rate Orifice Size [mm] RF¹ RF² RF3 LF RR LR CTR BAKE BROIL 18,000 17,000 18,000 15,000 5,000 9,500 9,500 18,000 13,500 1.92 1.92 1.92 1.78 1.01 1.40 1.38 1.90 1.64 Step 4. Install the anti-tip device WARNING To reduce the risk of tipping, the appliance must be secured by properly installing the anti-tip device packed with the appliance. • All ranges can tip, resulting in personal injury. • Tipping ranges can cause burns from spills, personal injury, and/or death. • To prevent accidental tipping, install and check the anti-tip bracket following the instructions and template supplied with the bracket. An anti-tip bracket and screws, installation instructions, and template are shipped with every range (PN DG94-00870B). The instructions include information necessary to complete the installation of the anti-tip bracket. Read and follow the instructions on the sheet and use the template for anti-tip bracket installation. If not properly installed, the range could be tipped by you or a child standing, sitting, or leaning on an open oven door. NOTE To install an anti-tip bracket, release and extend the leveling leg to a minimum clearance of 21/32" (16.5 mm) between the range bottom and the floor. To check if the bracket is installed and engaged properly, remove the warming drawer or storage drawer and look underneath the range to see that the leveling leg is engaged in the bracket. Carefully tip the range forward. The bracket should stop the range within 4" (10.2 cm) of tipping. If it does not, the bracket must be reinstalled. If the range is pulled from the wall for any reason, always repeat this procedure to verify the range is properly secured by the anti-tip bracket. Never completely remove the leveling legs or the range will not be secured to the anti-tip device properly. 24 English Installation instructions