Samsung NX58T5601SW/AA User Manual - Page 9

Stainless-steel surface, Racks

Get Samsung NX58T5601SW/AA PDF manuals and user guides View all Samsung NX58T5601SW/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Stainless-steel surface 1. Remove any spills, spots, and grease stains using a soft, wet cloth. 2. Apply an approved stainless-steel cleanser to a cloth or paper towel. 3. Clean one small area at a time, rubbing with the grain of the stainless steel if applicable. 4. When done, dry the surface using a soft, dry cloth. 5. Repeat steps 2 through 4 as many times as necessary. CAUTION • Do not use a steel-wool pad or abrasive cleanser on stainless steel surfaces. It will scratch the surface. • Do not spray any type of cleanser into the manifold holes. The ignition system is located in those holes and must be kept free of moisture. Racks To keep the racks clean, remove them from the cavity, and soak them in lukewarm soapy water. Then, scour soil off of the racks using a plastic scouring pad. If the racks do not slide in and out smoothly after you have cleaned them, rub the side rail guides with wax paper or a cloth containing a few drops of cooking oil. This will help the racks glide more easily on their tracks. NOTE • Do not put the racks in a dishwasher. • If a rack does not slide in and out smoothly, apply a few drops of cooking oil to the oven rack guides. • If a rack becomes too difficult to slide in or out, lubricate the rack with graphite lubricant. • To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864) or visit http://www.samsungparts.com/Default.aspx and search for part DG8101629A. CAUTION • Do not leave the racks in the oven during the self-cleaning cycle. The extreme heat generated in this cycle can permanently peel off the rack coating and make it difficult to slide the racks on the guide rails. • Do not spray cooking oil or lubricant directly onto the racks. Maintenance Samsung_GasRange_SimpleManual_DG68-01206A-01_EN+MES+CFR.indb 9 English 9 2020-06-04 �� 9:50:06

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
English 9
Maintenance
Stainless-steel surface
1.
Remove any spills, spots, and grease stains using a soft, wet cloth.
2.
Apply an approved stainless-steel cleanser to a cloth or paper towel.
3.
Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
4.
When done, dry the surface using a soft, dry cloth.
5.
Repeat steps 2 through 4 as many times as necessary.
CAUTION
•
Do not use a steel-wool pad or abrasive cleanser on stainless steel surfaces. It
will scratch the surface.
•
Do not spray any type of cleanser into the manifold holes. The ignition system
is located in those holes and must be kept free of moisture.
Racks
To keep the racks clean, remove them from the cavity, and soak them in lukewarm
soapy water. Then, scour soil off of the racks using a plastic scouring pad. If the
racks do not slide in and out smoothly after you have cleaned them, rub the side
rail guides with wax paper or a cloth containing a few drops of cooking oil. This
will help the racks glide more easily on their tracks.
NOTE
•
Do not put the racks in a dishwasher.
•
If a rack does not slide in and out smoothly, apply a few drops of cooking oil to
the oven rack guides.
•
If a rack becomes too difficult to slide in or out, lubricate the rack with graphite
lubricant.
•
To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864)
or visit http://www.samsungparts.com/Default.aspx and search for part DG81-
01629A.
CAUTION
•
Do not leave the racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the rack coating and
make it difficult to slide the racks on the guide rails.
•
Do not spray cooking oil or lubricant directly onto the racks.
Samsung_GasRange_SimpleManual_DG68-01206A-01_EN+MES+CFR.indb
9
2020-06-04
�� 9:50:06