Samsung NX60A6511SS/AA Installation Guide - Page 17
Installation instructions, Installing your gas range, Step 1. Unpack the range
View all Samsung NX60A6511SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation instructions Additional installation requirements for mobile homes The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current CAN/CSA Z240/MH Mobile Home Installation Code. Power cord location 2" The power cord for this appliance is located on the back of the range, near the bottom right hand corner. The 53-in (135-cm) power cord will come installed on the range and taped to the back for shipping. Installing your gas range IMPORTANT: Please read the following instructions, as well as the Important Safety Instructions section at the front of this manual, completely and carefully BEFORE installing and/or operating the gas range. Improper installation, adjustment, service, or maintenance can cause personal injury or property damage. NOTE To order parts or accessories, contact your local retailer or refer to the last page. NOTE To ensure proper installation, we strongly recommend that you hire a professional installer. 71/8" Power cord location Step 1. Unpack the range Remove all packaging materials. Failure to remove packaging materials could result in damage to the appliance. Inventory all loose parts against the Parts supplied components listed on page 11. Check for shipping damage and/or missing parts. Any damage and/or missing parts should be reported to your local retailer. Step 2. Connect the range to gas supply Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hookup has been completed. Don't forget to relight the pilot on other gas appliances when you turn the gas back on. Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector is recommended unless local codes require a hard-piped connection. English 17 Installation instructions Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb 17 2020-12-30 10:56:12