Samsung NX60A6511SS/AA Installation Guide - Page 20
Step 6. Level the range, shown at right.
View all Samsung NX60A6511SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation instructions Step 6. Level the range Leveling leg 1. Make sure the range is positioned where you want it. 2. Using a wrench, level the range by turning the front leveling legs in or out as necessary. Counterclockwise shortens the leg and lowers the range. Clockwise lengthens the leg and raises the range. NOTES • Adjusting the two front legs is usually sufficient, but adjust all four legs if necessary. • Adjust the leveling legs only as far as necessary to level the range. Extending the leveling legs more than necessary or removing legs can cause the range to be unstable. 3. If range is next to or between cabinets, make sure the cooktop (without the surface burner grates) is level with the countertops. 4. Position an oven rack in the center rack position. 5. Check the level of the range with a carpenter level using the two positions shown at right. 6. After the range becomes level, slide the range away from the wall so that the anti-tip bracket can be installed. Check your adjustments Use a level to check your adjustments. Place the level diagonally on the oven rack or surface cooktop, and confirm the range is level in the two directions shown below. A. Check direction 1. B. Check direction 2. If the level indicates that the range is not level, adjust the leveling legs with a wrench. Installation instructions 20 English Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb 20 2020-12-30 10:56:13