Samsung PN50B450B1DXZA User Manual - Page 10

Connecting, Cable Box, DescramblesSomeChannels

Get Samsung PN50B450B1DXZA PDF manuals and user guides View all Samsung PN50B450B1DXZA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

C) Connectingto a Cable Box that DescramblesSome Channels if your cable box descrambies only some channels (such as premium channels), follow the instructions below, You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable, (These items are available at most electronics stores,) Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". 2, Connect this cable to a two-way splitter. incoming cable Splitter Connect an Antenna cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box. Connect an Antenna cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. incoming cable Splitter Cable Box Cable Box RF (AIB) Switch Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. incoming IN c_uE our Splitter L ) Cable Box RF {_JB) Switch Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV. __ _ _ TV RAN_TEIar I ..... Sp,it,_r L j RF(ffIS) Switch After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
C)
Connecting
to a
Cable Box
that
DescramblesSomeChannels
if your cable box
descrambies
only
some channels (such
as
premium channels),
follow
the
instructions
below,
You
will need
a
two-way splitter,
an
RF (A/B) switch,
and
four lengths of Antenna cable, (These items
are available at
most
electronics stores,)
Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN".
2,
Connect this cable to a two-way splitter.
incoming
cable
Splitter
Connect an Antenna cable between the
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
Cable
Box
Connect an Antenna cable between the ANT
OUT terminal on the cable box and the B-IN
terminal on the RF(A/B) switch.
incoming
cable
Splitter
RF (AIB)
Cable
Box
Switch
Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and the
ANT IN terminal on the rear of the TV.
incoming
IN
c_uE
our
Splitter
L
)
RF {_JB)
Cable Box
Switch
__
_
_
TV
RAN_TEIar
I
.....
Sp,it,_r
L
j
RF(ffIS)
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position
to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel,
which is usually channel 3 or 4.)