Samsung PN50C680 User Manual (user Manual) (ver.1.0) (English) - Page 49
Troubleshooting, Issues, Solutions and Explanations - flickering when watching 3d
View all Samsung PN50C680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
05 Other Information Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit "www.samsung.com," then click on Support, or call Samsung customer service at 1-800-SAMSUNG. Issues Solutions and Explanations Poor picture First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image. (go to MENU - Support - Self Diagnosis - Picture Test) (p. 26) If the test image is properly displayed, the poor picture may be caused by the source or signal. The TV image does not look as good as it did in the store. • If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD stations from the channel line up. • Antenna connection: Try HD stations after performing Auto program. ✎✎ Many HD channels are up scaled from SD(Standard Definition) contents. • Adjust the Cable/Sat box video output resolution to 1080i or 720p. The picture is distorted: macro block error, small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports and action movies. • Low signal level can cause picture distortion. This is not a TV problem. • Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital TV. Color is wrong or missing. • If you're using Component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause color problems or a blank screen. There is poor color or brightness. There is a dotted line on the edge of the screen. The picture is black and white. When changing channels, the picture freezes or is distorted or delayed. 3D The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. You may notice a small amount of screen flickering when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. The ideal viewing distance should be three times or more the height of the screen. If you leave 3D glasses on, battery lifespan is shortened. • Adjust the Picture options in the TV menu. (go to Picture mode / Color / Brightness / Sharpness) (p. 15) • Adjust Energy Saving option in the Setup menu (go to MENU - Picture - Eco Solution - Energy Saving) (p. 15) • Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset) (p. 20) • If the picture size is set to Screen Fit, change it to 16:9 (p. 17). • Change cable/satellite box resolution. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. • If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes) • Set the output resolution of the cable box to 1080i or 720p. • If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. • If so, dim the light or turn the lamp off. • We recommend sitting with viewer's eyes on a level with the screen. • Turn off 3D glasses while not using them. 49 English