Samsung PN63B550 User Manual (ENGLISH) - Page 10
Connections
UPC - 036725229464
View all Samsung PN63B550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 300 Ω Flat Twin Leads" below. If your antenna has one lead that looks like this, see "Antennas with 75 Ω Round Leads". If you have two antennas, see "Separate VHF and UHF Antennas". ❑ Antennas with 300 Ω Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has 300 Ω twin flat leads, follow the directions below. 1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied). Use a screwdriver to tighten the screws. ANT IN 2. Plug the adaptor into the ANT IN terminal on the back of the TV. ❑ Antennas with 75 Ω Round Leads ANT IN Plug the antenna lead into the ANT IN terminal on the back of the TV. ❑ Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1. Connect both antenna leads to the combiner. 2. Plug the combiner into the ANT IN terminal on the bottom of the back panel. Connecting Cable TV To connect to a cable TV system, follow the instructions below. ❑ Cable without a Cable Box Plug the incoming cable into the ANT IN terminal on the back of the TV. N Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. UHF VHF UHF VHF ANT IN ANT IN ❑ Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. N This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT". 2. Connect the other end of this cable to the ANT IN terminal on the back of the TV. ANT IN ANT OUT ANT IN English - 10 Continued...