Samsung R9000 User Manual - Page 13

Automatic charging When the battery indicator blinks during cleaning, the POWERbot will return to the docking station to charge itself automatically. Recharging You can command the POWERbot to recharge at the docking station while it is in cleaning. Low battery Manually charge the POWERbot by placing it on the docking station. Steps to take if recharging not occuring: Check the installation status of the docking station when: ffthe docking station is located in a place where the POWERbot cannot easily access it. ffthe distance between the docking station and POWERbot is over 16.5 ft (5 m). -- It may take a long time for POWERbot to return to the docking station for recharging Manually charge the POWERbot when: ffthe docking station is located in a corner ffthe battery is fully exhausted ffthe POWERbot is immobilized by an obstacle (furniture etc.) ffthe POWERbot can't climb a threshold near the docking station (The maximum height of a threshold the POWERbot can climb is about 0.6 inches (1.5 cm).) ffthe battery indicator blinks ffthe POWERbot is set to the Spot clean or Manual clean mode ENGLISH-13