Samsung R9000 User Manual - Page 21

Notes and cautions

Page 21 highlights

Notes and cautions Charging In use Note Note ffIf the battery overheats during charging, it may take longer to charge. ffWhen automatic charging is not working, do the following: -- Turn the emergency switch (on the bottom of POWERbot) off and on again. -- Unplug the docking station's power plug and then plug it back on. -- Unplug the docking station, and then check whether there is any foreign matter on the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag. -- Check for any obstacles such as reflective objects, chairs, etc. near the docking station. ffIf POWERbot is left detached from the docking station, the battery will drain naturally. -- Try to keep POWERbot being charged on the docking station. (However, turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc.) ffThe POWERbot may get caught on thresholds, etc. during cleaning. -- To restart operation, shut off the emergency switch, move the POWERbot to an area where it can move easily, and then turn on the power again. ffThe POWERbot cannot completely clean areas it cannot enter, such as corners, between the wall and sofa, etc. -- Please use another cleaning tool to clean them regularly. ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning. -- Please use another cleaning tool to clean them regularly. ffIf the battery becomes low during Auto clean mode, POWERbot will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time) ffYou cannot select and have the POWERbot execute Spot/Manual clean mode while it is charging. ffDo not unnecessarily move the POWERbot or press buttons while it is in Auto clean mode. It assumes that cleaning is complete and starts cleaning again from the beginning. ffClose doors before cleaning with the POWERbot. The POWERbot can enter rooms through thresholds even though the thresholds are below 1.9 in (5 cm). ffTry not to use the POWERbot at areas near slides, indoor swing, pots, fireplaces, or places with flame or moisture. -- If not, it may cause the loss of property. ffDo not lie down around the POWERBOT that is running. -- Your hair may be caught in the Pet brush, resulting in physical injury. ENGLISH-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

ENGLISH-
21
Notes and cautions
Charging
Note
f
If the battery overheats during charging, it
may take longer to charge.
f
When automatic charging is not working, do
the following:
Turn the emergency switch (on the bottom of
POWERbot) off and on again.
Unplug the docking station's power plug and
then plug it back on.
Unplug the docking station, and then check
whether there is any foreign matter on the
charge pins and clean POWERbot and the
charge pins of the docking station with a dry
cloth or rag.
Check for any obstacles such as reflective
objects, chairs, etc. near the docking station.
f
If POWERbot is left detached from the
docking station, the battery will drain naturally.
Try to keep POWERbot being charged on
the docking station. (However, turn off the
emergency switch and leave the docking
station unplugged when planning to leave the
house for long periods of time by going on a
business trip or vacation, etc.)
In use
Note
f
The POWERbot may get caught on
thresholds, etc. during cleaning.
To restart operation, shut off the emergency
switch, move the POWERbot to an area where
it can move easily, and then turn on the power
again.
f
The POWERbot cannot completely clean
areas it cannot enter, such as corners,
between the wall and sofa, etc.
Please use another cleaning tool to clean them
regularly.
f
The POWERbot cannot vacuum clumps of
dirt, so some may remain on the floor after
cleaning.
Please use another cleaning tool to clean them
regularly.
f
If the battery becomes low during Auto clean
mode, POWERbot will recharge and finish
cleaning the remaining area after recharging.
(Repeat cleaning frequency: 1 time)
f
You cannot select and have the POWERbot
execute Spot/Manual clean mode while it is
charging.
f
Do not unnecessarily move the POWERbot or
press buttons while it is in Auto clean mode. It
assumes that cleaning is complete and starts
cleaning again from the beginning.
f
Close doors before cleaning with the
POWERbot. The POWERbot can enter
rooms through thresholds even though the
thresholds are below 1.9 in (5 cm).
f
Try not to use the POWERbot at areas near
slides, indoor swing, pots, fireplaces, or
places with flame or moisture.
If not, it may cause the loss of property.
f
Do not lie down around the POWERBOT that
is running.
Your hair may be caught in the Pet brush,
resulting in physical injury.