Samsung RF24FSEDBSR Quick Guide Ver.1.0 (English) - Page 2

CRITICAL INSTALLATION WARNINGS • Do not install the refrigerator in a damp place or place where it may come in contact with water. - Deteriorated insulation on electrical parts may cause an electric shock or fire. • Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other appliances. • Do not plug several appliances into the same multiple power strip. The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the voltage listed on the refrigerator's rating plate. - This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires. • If the wall socket is loose, do not insert the power plug. - There is a risk of electric shock of fire. • Do not use a cord that shows cracks or abrasion damage along its length or at either end. • Do not bend the power cord excessively or place heavy articles on it. • Do not twist or tie the power cord. • Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance. - When moving the refrigerator, be careful not to roll over or damage the power cord - This may result in an electric shock or fire. • Never unplug your refrigerator by pulling on the power cord. Always grip the plug fi rmly and pull straight out from the outlet. - Damage to the cord may cause a short-circuit, fire, and/or electric shock. • Do not use aerosols near the refrigerator. - Using aerosols near the refrigerator may cause an explosion or fire. • Do not install this appliance near a heater, inflammable material. • Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). • Do not install this appliance in a location where gas may leak. - This may result in an electric shock or fire. • This refrigerator must be properly located and installed in accordance with the instructions in this manual before you use it. • Connect the power plug in the proper position with the cord hanging down. - If you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock. • When moving the refrigerator, be careful not to roll over or damage the power cord. - This constitutes a fire hazard. • Make sure that the power plug is not squashed or damaged by the back of the refrigerator. • Keep the packing materials out of reach of children. - There is a risk of death from suffocation if a child puts the packing materials on his or her head. • The appliance must be positioned so that the plug is accessible after installation. - Failing to do so may result in an electric shock or fire due to electric leakage. • You need to remove all the protective plastic film before you initially plug the product in.