Samsung RF24FSEDBSR Quick Guide Ver.1.0 (English) - Page 8

The Installation Space - width with door open

Page 8 highlights

2. The Installation Space 2 inches 2 inches 33/4 inches Selecting the best location for the Refrigerator • A location with easy access to a water supply. • A location without direct exposure to sunlight. • A location with a level floor. • A location with enough space for the refrigerator doors to open easily. • A location that allows sufficient space to the right, left, back and top for air circulation. • A location that allows you to move the refrigerator easily if it needs maintenance or service. B A CE Model RF24FS** Depth "A" 28 5/8" (726mm) Width "B" 35 6/8" (908mm) D Height "C" 68 7/8" (1749mm) Overall Height "D" 70" (1777mm) Depth "E" 31" (788mm) • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • •Do not install the refrigerator where the temperature will go below 50ºF (10ºC). • •Do not locate the refrigerator where it may become wet FLOORING For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator, or approximately 359lbs (165kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

2. The Installation Space
Selecting the best location for the Refrigerator
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with a level floor.
• A location with enough space for the refrigerator doors to open easily.
• A location that allows sufficient space to the right, left, back and top for air circulation.
• A location that allows you to move the refrigerator easily if it needs maintenance or service.
• Allow clearance to the right, left, back and top when installing. This will help reduce power con-
sumption and keep your energy bills lower.
• •Do not install the refrigerator where the temperature will go below 50ºF (10ºC).
• •Do not locate the refrigerator where it may become wet
FLOORING
For proper installation, you must place this refrigerator on a level, hard
surface that is the same height as the rest of the floor. This surface should
be strong enough to support a fully loaded refrigerator, or approximately
359lbs (165kg).
To protect the finish of the flooring, cut a large section of the cardboard
carton and place it under the refrigerator where you are working. When
moving the refrigerator, you need to pull and push it straight forwards or
back. Do not wiggle it from side to side.
Model
RF24FS**
Depth “A”
28 5/8” (726mm)
Width “B”
35 6/8” (908mm)
Height “C”
68 7/8” (1749mm)
Overall Height “D”
70” (1777mm)
Depth “E”
31” (788mm)
3
inches
3/4
2 inches
2 inches
E
C
A
B
D