Samsung RF26HFENDWW User Manual - Page 10

Disassemble the refrigerator doors

Get Samsung RF26HFENDWW PDF manuals and user guides View all Samsung RF26HFENDWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Disassemble the refrigerator doors Be careful not to drop and scratch the WARNING doors while removing them. 4. Lift the door straight up to remove. With the door opened 1. Remove 3 screws holding down the TOP TABLE ( 1 ) and turn it with wires connected. 1 5. Remove the screw ( 6 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 7 ) attached to the lower left and right door hinges with an allen wrench (3/16"). Remove the lower left and right door hinges ( 8 ). 2. Disconnect two connector ( 2 ) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. 8 6 7 2 Allen wrench 3. Remove the bolt ( 3 ) attached to the upper hinge with Socket wrench (10 mm). Remove the ground screw ( 4 ) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 5 ). 3 4 5 DA68-02601C-00.indb 10 English - 10 2014. 8. 18. 8:45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
English - 10
Disassemble the refrigerator doors
Be careful not to drop and scratch the
doors while removing them.
With the door opened
1.
Remove 3 screws holding down the TOP
TABLE (
1
) and turn it with wires connected.
1
2.
Disconnect two connector (
2
) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
2
3.
Remove the bolt ( 
3
 ) attached to the upper
hinge with Socket wrench (10 mm). Remove
the ground screw (
4
)
attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
(
5
).
3
4
5
WARNING
4.
Lift the door straight up to remove.
5.
Remove the screw (
6
) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
7
)
attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove
the lower left and right door hinges (
8
).
Allen wrench
Allen wrench
8
6
7
DA68-02601C-00.indb 10
DA68-02601C-00.indb
10
2014. 8. 18.
8:45
2014. 8. 18.
8:45