Samsung RF28JBEDBSG User Manual - Page 23
Using The One Lever, Dispenser - ice maker reset
View all Samsung RF28JBEDBSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Controlling the fridge temperature USING THE ONE LEVER DISPENSER Push the appropriate ice type button to select what you want dispensed. operating Recommend Temp (Fridge) : 37 °F (or 3 °C ) The fridge temperature can be set between 34 °F and 44 °F (or between 1 °C and 7 °C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1 °F (or 1 °C) with each press. See below. Fahrenheit : 3 7 °F ➞ 36 °F ➞ 35 °F ➞ 34 °F ➞ 44 °F ➞ 43 °F ➞ 42 °F ➞ 41 °F ➞ 40 °F ➞ 39 °F ➞ 38 °F ➞ 37 °F. Centigrade : 3 °C ➞ 2 °C ➞ 1 °C ➞ 7 °C ➞ 6 °C ➞ 5 °C ➞ 4 °C ➞ 3 °C. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display. -- The temperature of the Freezer or Fridge may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside. -- A rise in temperature may cause the digital display to blink. Once the Freezer and Fridge temperature return to their normal set temperatures, the blinking will stop. -- If the blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in. -- If there is a communication error between the Display and Main Controller, the Convertible Display light may blink. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center. NO ICE Select this if you want to turn ice maker off Using the ice Dispenser Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. • To select water, press the water button on the display, and then press the dispenser lever. • To select Ice, press the ICE type button of your choice on the display, and then press the dispenser lever. • If you have selected cubed ice, when you press the lever, the dispenser may dispense a small amount of crushed ice first. • If ice doesn't come out, pull out the ice bucket and press the test button located on the right side of ice maker. DA68-02952B-04.indb 23 English - 23 2016. 3. 30. �� 1:33