Samsung RF28K9580SR User Manual - Page 31
To correct the door gap, Philips, screwdriver, Allen wrench, To narrow the gap, turn the gap bolt
View all Samsung RF28K9580SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installation To correct the door gap Door gaps can be corrected using the gap bolt on the top right corner of the refrigerator. 1. With the door closed, use a Philips screwdriver to remove 6 screws on the top cover with the wire connectors. 2. Use a 4 mm Allen wrench (not provided) to correct the door gap between two doors. - To widen the gap, turn the gap bolt clockwise. - To narrow the gap, turn the gap bolt counterclockwise. 3. When done, reinsert the top cover. CAUTION The electrical connectors must be left intact during this process. Use caution so you don't tangle the connector wires or peel off the coating. Untitled-1 31 English 31 2016-04-25 12:12:27
English
31
Installation
To correct the door gap
Door gaps can be corrected using the
gap bolt on the top right corner of the
refrigerator.
1.
With the door closed, use a
Philips
screwdriver
to remove 6 screws on the
top cover with the wire connectors.
2.
Use a 4 mm
Allen wrench
(not
provided) to correct the door gap
between two doors.
-
To widen the gap, turn the gap bolt
clockwise.
-
To narrow the gap, turn the gap bolt
counterclockwise.
3.
When done, reinsert the top cover.
CAUTION
The electrical connectors must be left intact during this process. Use caution so you don't
tangle the connector wires or peel off the coating.
Untitled-1
31
2016-04-25
°° 12:12:27