Samsung RF323TEDBSR User Manual Ver.1.0 (English, French, Spanish) - Page 9

01 SETTING UP 3. Take out the lower basket ( 2 ) by lifting the basket up from the rail system. 2 ASSEMBLE THE FREEZER DRAWER To reattach the drawer after you have moved the fridge to its fi nal location, assemble the parts in reverse order. 4. Press the fixing hook of the rail system. ADJUSTING THE LEVEL Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. 5. Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail system. How to adjust the level 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it counterclockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) Be careful not to scratch or dent the sliding CAUTION rail by letting it strike the floor. Make sure that you mount the freezer CAUTION basket in the right position when removing / installing the freezer door. Failing to do so may result in the door not opening or closing properly. flat-blade screwdriver (-) Control Lever Both control levers must be touching the CAUTION floor to avoid possible personal injury or property damage because of tipping. If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. %""JOEC


 setting up _09 1.