Samsung RF34H9960S4 User Manual Ver.0.3 (English, French, Spanish) - Page 16
Leveling The Refrigerator, And Adjusting The Door, Height And The Gap Between, The Doors
View all Samsung RF34H9960S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
6. Attach the front of the Top Cover, and then press down on its back until it lies flat. Reattach the screws. LEVELING THE REFRIGERATOR AND ADJUSTING THE DOOR HEIGHT AND THE GAP BETWEEN THE DOORS HOW TO LEVEL THE REFRIGERATOR If the Refrigerator is not level, it can cause a height difference between the doors. • Assemble the Fridge and Freezer doors CAUTION in the reverse order of disassembly. • If the Wire Connectors are cross-assembled, the display will not work properly. • Clips are located inside the cap on the top. • To prevent water leaks, if the refrigerator uses red clips, make sure the red clips are properly connected to the Coupler after you insert the Water Tube [E] into the center of the Coupler. • Insert a Flat-Head (-) Screwdriver into the slot in the Leveling Leg Control Lever and adjust the level by turning the Control Lever clockwise or counter-clockwise. When you rotate the Lever clockwise, you raise the refrigerator. When you rotate the Lever counter-clockwise, you lower the refrigerator. E clip A Center of the (6.35 mm) Indicator Line flat-blade screwdriver(-) Control Lever • Keep the clips out of the reach of CAUTION children and make sure that children do not play with them or put them into their mouths. • If the Refrigerator is not level back and front, put a solid panel (such as a plastic panel, a plastic ruler, etc.) on the floor where the rear legs will rest, and then fix it in place with plastic tape. When you push in the Refrigerator, make sure the rear legs rest on the panel. • If you have a wooden floor or similar soft floor, take care not to damage the floor when pushing the Refrigerator into place. DA68-03013A-03.indb 16 English - 16 2014. 2. 25. 4:04