Samsung RF4267HAWP User Manual (user Manual) (ver.0.2) (English, French, Spani - Page 7
Reattaching The Refrigerator, Doors, Disassemble The Flex Door, And Right Door - fridge
UPC - 036725560680
View all Samsung RF4267HAWP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
01 setting up 2 1 2. Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part ( 6 ) of the water line coupler. If a red clip is on the coupler, it must be caution removed before removing the tube. 4 Red Clip (1/4") 3 left and right door hinges with a philips screwdriver (+). Remove the 2 12 10 11 hex head bolts ( 11 ) attached to the lower left Allen wrench and right door hinges with an allen wrench (3/16"). Remove the lower left and right door hinges ( 12 ). Reattaching the refrigerator doors To reattach the fridge doors after you have moved the fridge to its final location, assemble parts in reverse order. Disassemble the Flex door 1. Take out the Flex Zone ( 1 ) by lifting it up. 1 5 6 2. Take off the cover ( 2 ) w/harness 2 3. Pull and remove the hinge lever ( 7 ) . Remove the with a flat-blade ground screw ( 8 ) attached to the upper left and screwdriver (-). right door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 9 ). 8 3. Disconnect the housing 7 connector. 9 4. Lift the door straight up to remove. 4. Remove 2 hex head bolts from sides with a socket wrench (10mm). 5. Lift up the Flex door from the rails. 5. Remove the screw ( 10 ) attached to the lower setting up _07